Reglaje de Valvulas a una BMW R1200GS

En el siguiente post, podemos ver una guia de como realizar un reglaje de valvulas en una BMW R1200GS


http://www.bmwmotos.com/cgi-bin/yabb2/YaBB.pl?num=1237436930

Como añadir al calendario un articulo de Ebay

Buscamos el número del articulo y lo añadimos al final de esta URL

http://tictocbay.com/calendar.php?itemid=

Debranding Nokia N97

The step-thru will allow people on older versions of FW to upgrade to the latest version, regardless of what country you are in.

Before going any further, as usual we have to have the warnings;

Please read through the guide first, and if you are unsure about anything, then do not start it.

This site will not accept any blame or liability for any issues that may occur following the guide.

Ok after saying that, I can assure you this guide is exactly what I did, and it only took a few moments to change the product code. Run the upgrade, and change the code back again.

---

Step 1.

Please backup any data before you start. And then check the backup is ok.

Step 2.

You will need to know what the product is for your phone. You will find this on the label inside the battery compartment. It is a seven digit number and will start with 05*****

Step 3.

You will need to down load Nemesis Service Suite (NSS) V 1.0.38.15. It is free (not even a trial period) and can be download from HERE. This version supports N97 and 5800

Step 4.

Unzip the file and run the install.

Step 5.

Connect your N97 to your PC, and select Nokia Suite, this will not work on Mass Storage mode. But you must close Nokia Suite on your pc if it is running.



Click on the magnifying glass to scan for your phone. It should pick it up in a few seconds.

Step 6.

Once you phone has been detected, please select the Phone Info button, and then the scan button.



If you see a message "Scan for product Error!" please reconnect your phone making sure you select PC Suite. Not Mass Storage.

Step 7.

Once your phone details are in the Details/Information view plane, then enter the new product code you want to use in the Product Code field, and tick the Enable box.

For the list of codes, please see the end of this stepthru.

This is what NSS should look like before clicking on the Write button. Please do not use any other options or buttons! I haven't tested them.



Sorry for the link, I tried to do images for all the steps but couldn't get them to resize for this site, but will work on it.

Step 8.

With your new product code entered and the enable box ticked, select the Write button below the enable boxes.

After a few moments the job will be done. You will see the message "Write new values....Done"

You can now close NSS, and run the NSU and it should pick up V12 to install. Once installed, your phone will restart.

If your phone doesn't restart, or you are not happy with the way it is performing after, then please follow the spinlala post in this section to do a hard reset.

Your phone should retain all your personal data on it, including any security PIN's you have setup.

Once this is done, you can repeat the above process and enter your original product code. This will not affect the upgrade at all.

---

Please, note if you use Nokia Push email, you will need to revert back to your original product code to use your previous email settings. And any other account associated with your hand set, ie OVI etc.

Also if you have to return the phone for any warranty claims, you should make sure you have the original code set.


Here is a link to the codes that can accept the V12 upgrade. Here is the link to the codes that can accept the V20 upgrade.

 I used 0576460 product code for N97 white spanish euro.


Please note there may be more recent updates for your country, so try a Google search for your country N97 product code.

Enjoy your upgrade

Via - http://www.nokian97forum.com/how-to/(step-by-step)-how-to-change-your-n97-product-code-t1189/

Como sincronizar Google Contacts y S60 v5

Go to Menu -> settings -> Connectivity -> Data transfer -> Sync -> New sync profile

In the 1st page put any name for the profile
In the 2nd page select "1.2"
In the 3rd page select ONLY Contacts
In the 4rth page type "Contacts" (without the quotes)
In the 5th page select "Internet"
In the 6th page type "https://m.google.com/syncml" (watch out for the "s" on "https")
In the 7th page type "Google" (capital ‘G’ is important)
In the 8th page put the user name of your account
In the 9th page put the password of your account

Once you are over with the pages it will go you to "sync"
You will press options -> Change active profile -> The name of your profile
It's ready for you to try it!

http://www.dotsis.com/mobile_phone/showthread.php?t=164160